1、net 二级域名绑定子目录如何实现
要实现这个功能，首先要做域名泛解析，去域名管理里面的域名解析中添加一个：*.worldbao.com 指向服务器ip。
第二，重写URLRewrite里面的两个方法。
1.BaseMoleRewriter.cs 里面的BaseMoleRewriter_AuthorizeRequest方法
将
[c-sharp] view plaincopy
protected virtual void BaseMoleRewriter_AuthorizeRequest(object sender, EventArgs e)
{
HttpApplication app = (HttpApplication) sender;
Rewrite(app.Request.Path, app);
}
[c-sharp] view plaincopy
protected virtual void BaseMoleRewriter_AuthorizeRequest(object sender, EventArgs e)
{
HttpApplication app = (HttpApplication) sender;
Rewrite(app.Request.Path, app);
}
改为
[c-sharp] view plaincopy
protected virtual void BaseMoleRewriter_AuthorizeRequest(object sender, EventArgs e)
{
HttpApplication app = (HttpApplication) sender;
Rewrite(app.Request.Url.AbsoluteUri, app);
}
[c-sharp] view plaincopy
protected virtual void BaseMoleRewriter_AuthorizeRequest(object sender, EventArgs e)
{
HttpApplication app = (HttpApplication) sender;
Rewrite(app.Request.Url.AbsoluteUri, app);
}
2， MoleRewriter.cs 里面的 Rewrite 方法
将
[c-sharp] view plaincopy
protected override void Rewrite(string requestedPath, System.Web.HttpApplication app)
{
// log information to the Trace object.
app.Context.Trace.Write("MoleRewriter", "Entering MoleRewriter");
// get the configuration rules
RewriterRuleCollection rules = RewriterConfiguration.GetConfig().Rules;
// iterate through each rule...
for(int i = 0; i < rules.Count; i++)
{
// get the pattern to look for, and Resolve the Url (convert ~ into the appropriate directory)
string lookFor = "^" + RewriterUtils.ResolveUrl(app.Context.Request.ApplicationPath, rules[i].LookFor) + "$";
// Create a regex (note that IgnoreCase is set...)
Regex re = new Regex(lookFor, RegexOptions.IgnoreCase);
// See if a match is found
if (re.IsMatch(requestedPath))
{
// match found - do any replacement needed
string sendToUrl = RewriterUtils.ResolveUrl(app.Context.Request.ApplicationPath, re.Replace(requestedPath, rules[i].SendTo));
// log rewriting information to the Trace object
app.Context.Trace.Write("MoleRewriter", "Rewriting URL to " + sendToUrl);
// Rewrite the URL
RewriterUtils.RewriteUrl(app.Context, sendToUrl);
break; // exit the for loop
}
}
// Log information to the Trace object
app.Context.Trace.Write("MoleRewriter", "Exiting MoleRewriter");
}
}
[c-sharp] view plaincopy
protected override void Rewrite(string requestedPath,
System.Web.HttpApplication app)
{
// log information to the Trace object.
app.Context.Trace.Write("MoleRewriter", "Entering MoleRewriter");
// get the configuration rules
RewriterRuleCollection rules =
RewriterConfiguration.GetConfig().Rules;
// iterate through each rule...
for(int i = 0; i < rules.Count; i++)
{
// get the pattern to look for, and Resolve the Url (convert ~ into
the appropriate directory)
string lookFor = "^" +
RewriterUtils.ResolveUrl(app.Context.Request.ApplicationPath,
rules[i].LookFor) + "$";
// Create a regex (note that IgnoreCase is set...)
Regex re = new Regex(lookFor, RegexOptions.IgnoreCase);
// See if a match is found
if (re.IsMatch(requestedPath))
{
// match found - do any replacement needed
string sendToUrl =
RewriterUtils.ResolveUrl(app.Context.Request.ApplicationPath,
re.Replace(requestedPath, rules[i].SendTo));
// log rewriting information to the Trace object
app.Context.Trace.Write("MoleRewriter", "Rewriting URL to " +
sendToUrl);
// Rewrite the URL
RewriterUtils.RewriteUrl(app.Context, sendToUrl);
break; // exit the for loop
}
}
// Log information to the Trace object
app.Context.Trace.Write("MoleRewriter", "Exiting MoleRewriter");
}
}
改为
[c-sharp] view plaincopy
protected override void Rewrite(string requestedPath, System.Web.HttpApplication app)
{
// log information to the Trace object.
app.Context.Trace.Write("MoleRewriter", "Entering MoleRewriter");
// get the configuration rules
RewriterRuleCollection rules = RewriterConfiguration.GetConfig().Rules;
// iterate through each rule...
for(int i = 0; i < rules.Count; i++)
{
// get the pattern to look for, and Resolve the Url (convert ~ into the appropriate directory)
string lookFor = "^" + rules[i].LookFor + "$";
// Create a regex (note that IgnoreCase is set...)
Regex re = new Regex(lookFor, RegexOptions.IgnoreCase);
// See if a match is found
if (re.IsMatch(requestedPath))
{
// match found - do any replacement needed
string sendToUrl = RewriterUtils.ResolveUrl(app.Context.Request.ApplicationPath, re.Replace(requestedPath, rules[i].SendTo));
// log rewriting information to the Trace object
app.Context.Trace.Write("MoleRewriter", "Rewriting URL to " + sendToUrl);
// Rewrite the URL
RewriterUtils.RewriteUrl(app.Context, sendToUrl);
break; // exit the for loop
}
}
// Log information to the Trace object
app.Context.Trace.Write("MoleRewriter", "Exiting MoleRewriter");
}
}
[c-sharp] view plaincopy
protected override void Rewrite(string requestedPath,
System.Web.HttpApplication app)
{
// log information to the Trace object.
app.Context.Trace.Write("MoleRewriter", "Entering MoleRewriter");
// get the configuration rules
RewriterRuleCollection rules =
RewriterConfiguration.GetConfig().Rules;
// iterate through each rule...
for(int i = 0; i < rules.Count; i++)
{
// get the pattern to look for, and Resolve the Url (convert ~ into
the appropriate directory)
string lookFor = "^" + rules[i].LookFor + "$";
// Create a regex (note that IgnoreCase is set...)
Regex re = new Regex(lookFor, RegexOptions.IgnoreCase);
// See if a match is found
if (re.IsMatch(requestedPath))
{
// match found - do any replacement needed
string sendToUrl =
RewriterUtils.ResolveUrl(app.Context.Request.ApplicationPath,
re.Replace(requestedPath, rules[i].SendTo));
// log rewriting information to the Trace object
app.Context.Trace.Write("MoleRewriter", "Rewriting URL to " +
sendToUrl);
// Rewrite the URL
RewriterUtils.RewriteUrl(app.Context, sendToUrl);
break; // exit the for loop
}
}
// Log information to the Trace object
app.Context.Trace.Write("MoleRewriter", "Exiting MoleRewriter");
}
}
就是将
string lookFor = "^" + RewriterUtils.ResolveUrl(app.Context.Request.ApplicationPath, rules[i].LookFor) + "$";
改成了
string lookFor = "^" + rules[i].LookFor + "$";
完成这过程之后将整个项目重新编译一下。
这些都做完之后，
在webconfig配置里面的
<configSections>里面 添加：
[xhtml] view plaincopy
<section name="RewriterConfig" type="URLRewriter.Config., URLRewriter"/>
[xhtml] view plaincopy
<section name="RewriterConfig" type="URLRewriter.Config., URLRewriter"/>
在</configSections>下面添加
[xhtml] view plaincopy
<RewriterConfig>
<!-- 处理默认首页失败-->
<Rules>
<RewriterRule>
<LookFor>http://www/.worldbao/.com/</LookFor>
<SendTo>~/default.aspx</SendTo>
</RewriterRule>
</Rules>
<!-- 处理默认首页失败-->
<!--二级域名正则-->
<Rules>
<RewriterRule>
<LookFor>http://([a-zA-Z|0-9]+)/.worldbao/.com/</LookFor>
<SendTo>/user/user.aspx?us=$1</SendTo>
</RewriterRule>
</Rules>
<!--二级域名正则-->
</RewriterConfig>
[xhtml] view plaincopy
<RewriterConfig>
<!-- 处理默认首页失败-->
<Rules>
<RewriterRule>
<LookFor>http://www/.worldbao/.com/</LookFor>
<SendTo>~/default.aspx</SendTo>
</RewriterRule>
</Rules>
<!-- 处理默认首页失败-->
<!--二级域名正则-->
<Rules>
<RewriterRule>
<LookFor>http://([a-zA-Z|0-9]+)/.worldbao/.com/</LookFor>
<SendTo>/user/user.aspx?us=$1</SendTo>
</RewriterRule>
</Rules>
<!--二级域名正则-->
</RewriterConfig>
在httpMoles里面添加
[xhtml] view plaincopy
<httpMoles>
<add type="URLRewriter.MoleRewriter, URLRewriter" name="MoleRewriter"/>
</httpMoles>
[xhtml] view plaincopy
<httpMoles>
<add type="URLRewriter.MoleRewriter, URLRewriter" name="MoleRewriter"/>
</httpMoles>
2、请教如何二级域名绑定子目录
二级域名应该单独开一个站点 指向到你想访问的目录， 你现在的设置是和主站点同时绑定访问，当然显示的是网站根目录啦
3、网站二级目录怎么绑定二级域名？IIS主机
首先需要你的域名服务器允许添加二级域名目录，操作起来和一级域名的一样，如果允许操作，再设定个首页访问就可以了
4、iis下如何绑定二级目录
又不是二级域名的绑定
你要新绑定一个二级目录
直接在IIS新建一个站点
然后指定根目录为blog不就好了
5、iis里怎么设置二级域名指向子目录？
推荐你使用 N点虚拟主机管理系统 完全免费。里面就可设置二级域名绑定子目录功能。或者在IIS里面再新建一个网站绑定你的二级域名，然后把文件目录指向你要设置的子目录。
6、如何绑定子域名（二级域名）到子目录？
具体操作步骤如下：1、进入思跃主机控制面板，点击“子域名管理”；2、输入您要绑定的版子域权名，例如：输入blog.domain.com即可绑定blog目录。3、您绑定的子域名会自动对应网站根目录下的同名目录。（例如：您绑定了blog.domain.com，如果您的根目录下已有blog目录，那么系统在绑定blog目录后，还将会自动生成一个index.html，放在您的blog目录下，您在绑定后直接删除此文件即可；如果您的根目录下没有对应目录，那么系统会自动生成一个blog目录来对应您绑定的子域名）注意：思跃主机控制面板不支持顶级域名绑定子目录。
7、IIS二级域名绑定子目录
首先，你的域名必须支持泛绑定其次可以在主目录下建个bbs存放论坛然后在IIS管理面板中，右击新建虚拟目录，目录指向你刚才建立的bbs最后在主机头设置时，设为空
8、IIS二级域名绑定子目录的问题
二级域名应该单独开一个站点 指向到你想访问的目录， 你现在的设置是和主站点同时绑定访问，当然显示的是网站根目录啦